 |
| Quantity: | |
|---|---|
Feature Of Y-Type Filter
●JTGYG Y-Type Filter is a improved small tube strainer which can remove a small amount of solid particles in the liquid, also can protect compressor, pump,instruments and other equipment to work successfully.
●With reasonable design,JTGYG Y-Type Filter achieves advantages of no dead comer,low resistance and easy drainage. Filter adopts multiple polishing processing steps to ensure that the interface Ra reach to 0.4 u m close to sanitary level. All of the surface is mirror polished.
Application
●All kinds of liquid particle filtering.
●Edible oil,beverage,wine filtration.
●Chemical filter.
●Compressors,pumps,instrumentation and other equipment pre-filtering and protection.
The Characteristic of Y-Type Filter
●The filter inner and outside surface using mirror palish,interface Ra reaching to 0.4μm up to sanitary level.“
●Filter housing adopts quick connection,easy to handle,economical and practical.
Operating Conditions
Max .operating Pressure | 0.6MPa、1.0MPa |
Max .operating Temperture | 150℃ |
Material
Shell | SS304、SSS316L |
Tube Cartridge | SS304、SS316L |
O-ring | EPDM、PTFE |
FKM、Silicone |
Connection
Connection of shell | Tri-clamp |
N1、N2 In-outlet | 2”/2.5”/3”Tri-clamp |
Surface Finish
Finish Type | Mechanical/electrolytical polishing, sand blasting |
Polishing Precision | Inner surface Ra≤0.4μm |
Dimension Parameters | In-outlet | |||
1” | 1.5” | 2” | 2.5” | |
A：Total height | 185 | 240 | ||
B：The distance from inlet to center | 220 | 275 | ||
C：Shell diameter | Φ76 | Φ101.6 | ||
E：The diameter of the filter screen | Φ50 | Φ76 | ||
F：The length of the filter screen | 135 | 180 | ||
The above-mentioned data is the standard, it can be customized according to customer's requirements；length: mm.
Selection Table
Qty. of cartridge | Shell Material | In-outlet connection | Dimension | O-ring |
1R | 4 | K | 20 | E |
1R=1芯 | 4= 304 | F=Flange | 10=1” | E=EPDM |
6= 316L | K=Tri-clamp | 15=1.5” | P=PTFE | |
L=Screw thread | 20=2” | V=Viton | ||
25=2.5” | S=Silicone | |||
30=3” |
Feature Of Y-Type Filter
●JTGYG Y-Type Filter is a improved small tube strainer which can remove a small amount of solid particles in the liquid, also can protect compressor, pump,instruments and other equipment to work successfully.
●With reasonable design,JTGYG Y-Type Filter achieves advantages of no dead comer,low resistance and easy drainage. Filter adopts multiple polishing processing steps to ensure that the interface Ra reach to 0.4 u m close to sanitary level. All of the surface is mirror polished.
Application
●All kinds of liquid particle filtering.
●Edible oil,beverage,wine filtration.
●Chemical filter.
●Compressors,pumps,instrumentation and other equipment pre-filtering and protection.
The Characteristic of Y-Type Filter
●The filter inner and outside surface using mirror palish,interface Ra reaching to 0.4μm up to sanitary level.“
●Filter housing adopts quick connection,easy to handle,economical and practical.
Operating Conditions
Max .operating Pressure | 0.6MPa、1.0MPa |
Max .operating Temperture | 150℃ |
Material
Shell | SS304、SSS316L |
Tube Cartridge | SS304、SS316L |
O-ring | EPDM、PTFE |
FKM、Silicone |
Connection
Connection of shell | Tri-clamp |
N1、N2 In-outlet | 2”/2.5”/3”Tri-clamp |
Surface Finish
Finish Type | Mechanical/electrolytical polishing, sand blasting |
Polishing Precision | Inner surface Ra≤0.4μm |
Dimension Parameters | In-outlet | |||
1” | 1.5” | 2” | 2.5” | |
A：Total height | 185 | 240 | ||
B：The distance from inlet to center | 220 | 275 | ||
C：Shell diameter | Φ76 | Φ101.6 | ||
E：The diameter of the filter screen | Φ50 | Φ76 | ||
F：The length of the filter screen | 135 | 180 | ||
The above-mentioned data is the standard, it can be customized according to customer's requirements；length: mm.
Selection Table
Qty. of cartridge | Shell Material | In-outlet connection | Dimension | O-ring |
1R | 4 | K | 20 | E |
1R=1芯 | 4= 304 | F=Flange | 10=1” | E=EPDM |
6= 316L | K=Tri-clamp | 15=1.5” | P=PTFE | |
L=Screw thread | 20=2” | V=Viton | ||
25=2.5” | S=Silicone | |||
30=3” |
