 |
| Quantity: | |
|---|---|
Feature Of Multi Bags Filter
Application: Food and beverage; bio engineering and pharmaceuical; petrochemical and chemical: automobile manufacturing;
petroleum and natural gas; electronic and natural gas; coating .paint . printing ink; nuclear power and thermal power and waste water fitration; liquid and gas purification of liquid and gas.
JTGDS Multi bags filter, for some coarse fitration and pre- fiteration process.
JTGDS Standard No. 01 bag or 02 bag, the standard model for 2~12 bags, and the maximum production customized to 24 bags can basically meet the requirements of varnious types of flow.
The Characteristic Of Multi bags filter
Large flow, Long service lfe.
Compact design can reduce occupied space and the loss of liquid .
Side entry and bottom out ensure that liquid medium can be completely discharged, the tangential position outlet, discharging pollution thoroughly, is corvenient to be operating.
The unique three-point clamp device ensures good sealing and avoid liquid side leakage .
The fiter housing can add swing arm and the eyebolt or quick- open design, operating corveniently and economically.
Operating Conditions
Max Operating Pressure | 1.0MPa |
Max Operating Temperature | 150℃ |
Surface Finish
Finish Type | Mechanical/ Electrolytical polishing Sand blasting |
Polishing Precision |
Outside Surface Ra≤0.8μm Basket 0.6μm |
Material
Shell | 304, 316L, Duplex SS, Tianium, Hastelloy |
Eyebolt | 304 |
Stabillzer blade | 304 |
O-ring | EPDM, PTFE,Viton, Silicone |
Connection
Connection of shell | Flange |
N1、N2 In-outlet | Flange,Tri-clamp, Thread |
N3 Pressure gauge (option) | 1/2"Female thread |
N4Vent valve (option) | 1/2"Male thread |
N5 Drain valve (option) | 1/2"Male thread |
Dimension Parameters
2P2S | 4P4S | 6P2S | 8P2S | |||||
Swing-arm type | Quick-open Type | Swing-arm type | Quick-open Type | Swing-arm type | Quick-open Type | Swing-arm type | Quick-open Type | |
A: Total height | 1880 | 1530 | 2030 | 1600 | 2130 | 1700 | 2520 | 2060 |
B: The distance trom inlet to center | 300 | 360 | 400 | 440 | 450 | 500 | 500 | |
C: Shell Diameter | φ400 | φ500 | φ550 | φ650 | φ750/800 | |||
D1: The height from inlet to ground | 1330 | 950 | 1425 | 975 | 1480 | 1000 | 1650 | 1150 |
D2: The height from oulet to ground | 300 | 400 | 350 | 400 | 400 | |||
In- oulet N1、N2 size | 4" | 4" | 5" | 5" | ||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
Qty,of Bag Filter | Model of Bag Fiter | Shell Material | In-outler comection] | O-ring | |
3P | 28 | 4 | F | E | |
2P=2Pc | 7P=7Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
3P=3Pc | 9P=9Pc | 2S=2#Bag:φ180x810 | 6= 316L | K=Tri-clamp | P=PTFE |
4P=4Pc | 12P=12Pc | D=Duplex SS | L=Thread | V=Viton | |
6P=6Pc | T=Titanium | S=Silicone | |||
H=Hastelloy | |||||
Feature Of Multi Bags Filter
Application: Food and beverage; bio engineering and pharmaceuical; petrochemical and chemical: automobile manufacturing;
petroleum and natural gas; electronic and natural gas; coating .paint . printing ink; nuclear power and thermal power and waste water fitration; liquid and gas purification of liquid and gas.
JTGDS Multi bags filter, for some coarse fitration and pre- fiteration process.
JTGDS Standard No. 01 bag or 02 bag, the standard model for 2~12 bags, and the maximum production customized to 24 bags can basically meet the requirements of varnious types of flow.
The Characteristic Of Multi bags filter
Large flow, Long service lfe.
Compact design can reduce occupied space and the loss of liquid .
Side entry and bottom out ensure that liquid medium can be completely discharged, the tangential position outlet, discharging pollution thoroughly, is corvenient to be operating.
The unique three-point clamp device ensures good sealing and avoid liquid side leakage .
The fiter housing can add swing arm and the eyebolt or quick- open design, operating corveniently and economically.
Operating Conditions
Max Operating Pressure | 1.0MPa |
Max Operating Temperature | 150℃ |
Surface Finish
Finish Type | Mechanical/ Electrolytical polishing Sand blasting |
Polishing Precision |
Outside Surface Ra≤0.8μm Basket 0.6μm |
Material
Shell | 304, 316L, Duplex SS, Tianium, Hastelloy |
Eyebolt | 304 |
Stabillzer blade | 304 |
O-ring | EPDM, PTFE,Viton, Silicone |
Connection
Connection of shell | Flange |
N1、N2 In-outlet | Flange,Tri-clamp, Thread |
N3 Pressure gauge (option) | 1/2"Female thread |
N4Vent valve (option) | 1/2"Male thread |
N5 Drain valve (option) | 1/2"Male thread |
Dimension Parameters
2P2S | 4P4S | 6P2S | 8P2S | |||||
Swing-arm type | Quick-open Type | Swing-arm type | Quick-open Type | Swing-arm type | Quick-open Type | Swing-arm type | Quick-open Type | |
A: Total height | 1880 | 1530 | 2030 | 1600 | 2130 | 1700 | 2520 | 2060 |
B: The distance trom inlet to center | 300 | 360 | 400 | 440 | 450 | 500 | 500 | |
C: Shell Diameter | φ400 | φ500 | φ550 | φ650 | φ750/800 | |||
D1: The height from inlet to ground | 1330 | 950 | 1425 | 975 | 1480 | 1000 | 1650 | 1150 |
D2: The height from oulet to ground | 300 | 400 | 350 | 400 | 400 | |||
In- oulet N1、N2 size | 4" | 4" | 5" | 5" | ||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
Qty,of Bag Filter | Model of Bag Fiter | Shell Material | In-outler comection] | O-ring | |
3P | 28 | 4 | F | E | |
2P=2Pc | 7P=7Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
3P=3Pc | 9P=9Pc | 2S=2#Bag:φ180x810 | 6= 316L | K=Tri-clamp | P=PTFE |
4P=4Pc | 12P=12Pc | D=Duplex SS | L=Thread | V=Viton | |
6P=6Pc | T=Titanium | S=Silicone | |||
H=Hastelloy | |||||
Inner Surface Ra≤06μm
