 |
| Quantity: | |
|---|---|
Feature Of Tube Fliter
●JTGTF Tube Filter is a improved small tube strainer which can remove a small amount of solid particles in the liquid,also can protect compressor,pump,instruments and other equipment to work normally.
●JTGTF Tube Filter adopts multiple polishing processing steps to ensure that the intertace Ra reach to 0.4 μ m close to sanitary level.All of the surface is mirror polished.
Application
●All kinds of liquid particle filtering.
●Edible oil,beverage,wine filtration.
●Chemical filter.
●Compressors,pumps,instrumentation and other equipment pre-fitering and protection.
The Characteristic of Tube Fliter
●The filter inner and outside surface using mirror polish,interface Ra reaching to 0.4μm up to sanitary level.
●Filter housing adopts quick connection,easy to handle,economical and practical.
Surface Finish
Finish Type | Mechanical polishing, electrolytic polishing, sand blasting, pickling |
Polishing Precision | iInner surface Ra≤0.6μm , |
Operating Conditions
Max Operating Pressure | 0.6MPa, 1.0MPa |
Max Operating Temp. | 150℃ |
Material
Filter Shell | SS304,SS 316L |
Screen Filter | SS304, SS316L |
Quick-open | SS304 |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shell connection | Flange (Eyebolt), Tri-clamp |
In-outlet N1, N2 | 2”/2.5”/3”Tri-clamp |
Dimension Parameter | 2" | In-outlet 2.5" | In-outlet3" | |||||||
46R | 48R | 56R | 58R | 46R | 48R | 56R | 58R | 56R | 58R | |
A：Total height | 621 | 833 | 621 | 833 | 621 | 833 | 621 | 833 | 621 | 833 |
B：The distance from inlet to center | 89 | 108 | 127 | |||||||
C：Shell diameter | Φ101.6 | Φ129 | Φ101.6 | Φ129 | Φ129 | |||||
D：InletN1 to filter cover height | 100 | 100 | 100 | |||||||
E：The diameter of the filter screen | Φ76 | Φ100 | Φ76 | Φ100 | Φ100 | |||||
F：The length of the filter screen | 554 | 766 | 554 | 766 | 554 | 766 | 554 | 766 | 554 | 766 |
The above-mentioned data is the standard, it can customize according tocustomer's requirements.
Selection Table
Qty. of cartridges | Model of cartridge | Shell material | In-outlet Connections | Dimension | O-ring |
1R | 46 | 4 | K | 20 | E |
1R=1pc | 46,48, 56, 58 | 4=304 | F=Flange | 20=2” | E=EPDM |
Example:46, “4” means diameter is Φ4, “6” means screen filter length is 600 mm | 6=316L | K=Tri-clamp | 25=2.5” | P=PTFE | |
L=Thread | 30=3” | V=Viton | |||
S=Silicone |
Feature Of Tube Fliter
●JTGTF Tube Filter is a improved small tube strainer which can remove a small amount of solid particles in the liquid,also can protect compressor,pump,instruments and other equipment to work normally.
●JTGTF Tube Filter adopts multiple polishing processing steps to ensure that the intertace Ra reach to 0.4 μ m close to sanitary level.All of the surface is mirror polished.
Application
●All kinds of liquid particle filtering.
●Edible oil,beverage,wine filtration.
●Chemical filter.
●Compressors,pumps,instrumentation and other equipment pre-fitering and protection.
The Characteristic of Tube Fliter
●The filter inner and outside surface using mirror polish,interface Ra reaching to 0.4μm up to sanitary level.
●Filter housing adopts quick connection,easy to handle,economical and practical.
Surface Finish
Finish Type | Mechanical polishing, electrolytic polishing, sand blasting, pickling |
Polishing Precision | iInner surface Ra≤0.6μm , |
Operating Conditions
Max Operating Pressure | 0.6MPa, 1.0MPa |
Max Operating Temp. | 150℃ |
Material
Filter Shell | SS304,SS 316L |
Screen Filter | SS304, SS316L |
Quick-open | SS304 |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shell connection | Flange (Eyebolt), Tri-clamp |
In-outlet N1, N2 | 2”/2.5”/3”Tri-clamp |
Dimension Parameter | 2" | In-outlet 2.5" | In-outlet3" | |||||||
46R | 48R | 56R | 58R | 46R | 48R | 56R | 58R | 56R | 58R | |
A：Total height | 621 | 833 | 621 | 833 | 621 | 833 | 621 | 833 | 621 | 833 |
B：The distance from inlet to center | 89 | 108 | 127 | |||||||
C：Shell diameter | Φ101.6 | Φ129 | Φ101.6 | Φ129 | Φ129 | |||||
D：InletN1 to filter cover height | 100 | 100 | 100 | |||||||
E：The diameter of the filter screen | Φ76 | Φ100 | Φ76 | Φ100 | Φ100 | |||||
F：The length of the filter screen | 554 | 766 | 554 | 766 | 554 | 766 | 554 | 766 | 554 | 766 |
The above-mentioned data is the standard, it can customize according tocustomer's requirements.
Selection Table
Qty. of cartridges | Model of cartridge | Shell material | In-outlet Connections | Dimension | O-ring |
1R | 46 | 4 | K | 20 | E |
1R=1pc | 46,48, 56, 58 | 4=304 | F=Flange | 20=2” | E=EPDM |
Example:46, “4” means diameter is Φ4, “6” means screen filter length is 600 mm | 6=316L | K=Tri-clamp | 25=2.5” | P=PTFE | |
L=Thread | 30=3” | V=Viton | |||
S=Silicone |
