 |
| Quantity: | |
|---|---|
Feature of Top Entru Bag Filter
JTGDD Top Entry Bag Filter Housing for some coarse fitration and pre-filteration process .
The design of side entry first and then top entry into the fiter bag does not cause turbulence and not reduce pressure because of the stabled pressure . Aiso this structure effectively protects the fiter bag .
The top cover is fully pressed and sealed, and the sealing effect is better.
With adjustable legs, the installation size can be adjusted accordingtotherequirementsoftheparticularspot.
Operating Conditions
Max. operating Pressure | 0.6MPa、1.0MPa |
Max .operatng Temperture | 150℃ |
Material
Shell | SS304.SS316L.Duplex SS, Titanium, Hastelloy |
Eyebolt | SS304 |
Stabilzer blade | SS304 |
O-ring | EPOM PTFE. Viton, Sicong |
Connection
Connection Of Shell | Flange |
In-outlet N1、N2 | Flange,Tri-clamp.Thread |
N3 Pressure Gaugelopton | M14×1.5 Male Thread(3#Bag/4#Bag) |
N4 Vent Valve (Option) | 1/4" Male Thread |
Surface Finish
Finish Type | Mechanical/ Eectolyicalpdibig Sand blasting |
Polishing Pecision | Inner surface Ra≤0.6μm |
Dimension Parameters
Cover | ||
| 1# | 2# | |
A: Total height | 790 | 1110 |
B: The distance from inlet to cente | 275 | |
C: Shell diameter | φ204 | φ204 |
D1: The height from inlet to ground | 620 | 940 |
D2: The height from outlet to ground | 200 | |
In-outlet N1,N2 Size | 1 . 5" or 2" | |
E: Stabilizer blade | 550 | 700 |
Max flow m3/h | 20 | 40 |
The above-mernioned clata is the standard, it can customize according to customer's requirements.
Selection Table
Qty,of Bag Filter | Modei of Bag Fiter | Shell Materlal | In-outer commection | O-ring |
1P | 2S | 4 | F | E |
1P=1Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
2S=2#Bag:φ180x810 | 6=316L | K=Tri-clamp | P=PTFE | |
3S=3#Bag:φ105×230 | D=Duplex SS | L=Thread | V=Viton | |
4S=4#Bag:φ105x380 | T=Titanium | S=Silicone | ||
H=Hastelloy |
Feature of Top Entru Bag Filter
JTGDD Top Entry Bag Filter Housing for some coarse fitration and pre-filteration process .
The design of side entry first and then top entry into the fiter bag does not cause turbulence and not reduce pressure because of the stabled pressure . Aiso this structure effectively protects the fiter bag .
The top cover is fully pressed and sealed, and the sealing effect is better.
With adjustable legs, the installation size can be adjusted accordingtotherequirementsoftheparticularspot.
Operating Conditions
Max. operating Pressure | 0.6MPa、1.0MPa |
Max .operatng Temperture | 150℃ |
Material
Shell | SS304.SS316L.Duplex SS, Titanium, Hastelloy |
Eyebolt | SS304 |
Stabilzer blade | SS304 |
O-ring | EPOM PTFE. Viton, Sicong |
Connection
Connection Of Shell | Flange |
In-outlet N1、N2 | Flange,Tri-clamp.Thread |
N3 Pressure Gaugelopton | M14×1.5 Male Thread(3#Bag/4#Bag) |
N4 Vent Valve (Option) | 1/4" Male Thread |
Surface Finish
Finish Type | Mechanical/ Eectolyicalpdibig Sand blasting |
Polishing Pecision | Inner surface Ra≤0.6μm |
Dimension Parameters
Cover | ||
| 1# | 2# | |
A: Total height | 790 | 1110 |
B: The distance from inlet to cente | 275 | |
C: Shell diameter | φ204 | φ204 |
D1: The height from inlet to ground | 620 | 940 |
D2: The height from outlet to ground | 200 | |
In-outlet N1,N2 Size | 1 . 5" or 2" | |
E: Stabilizer blade | 550 | 700 |
Max flow m3/h | 20 | 40 |
The above-mernioned clata is the standard, it can customize according to customer's requirements.
Selection Table
Qty,of Bag Filter | Modei of Bag Fiter | Shell Materlal | In-outer commection | O-ring |
1P | 2S | 4 | F | E |
1P=1Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
2S=2#Bag:φ180x810 | 6=316L | K=Tri-clamp | P=PTFE | |
3S=3#Bag:φ105×230 | D=Duplex SS | L=Thread | V=Viton | |
4S=4#Bag:φ105x380 | T=Titanium | S=Silicone | ||
H=Hastelloy |
