 |
| Quantity: | |
|---|---|
Feature of Side Entry Filter
JTGCD Side-entry bag fiter with single fiter bag is for some coarse filtration and pre-filtration process.
Side entry structure is a economical and reasonable design which can effectively save space of the filter.
Pressure ring and the spring ensure good seal between the fiter and the fiter bag.
With adjustable legs, the installation size can be adjusted according to the requirements of the particular spot.
Side entry bag filter
Operating Conditions
Max operating pressure | 0.6MPa、1.0MPa |
Max operating temperture | 150℃ |
Material
Shell | 304, 316L, Duplex SS, Titanium,Hastelloy |
Eyebolt | 304 |
Stabilizer Blade | 304 |
O-ring |
EPDM, PTFE, Viton, Silicone |
Connection
Connection of shell | Flange |
In-outlet N1、N2 | Flange, Tn-clamp, Thread |
N3 Pressure gauge (option) | 1.5"Tri-clamp(1#Bag/2#Bag) M14×1.5 Female thread (3#Bag/4#Bag) |
N4Vent valve (option) | 1/4"Male thread |
Surface Finish
Finish Type | Mechanical/ Eiectrolytical polishing Sand blasting |
Polishing Precision | Inner surface Ra≤0.6μm Outside surface Ra≤0.8μm Basket 0.6μm |
Dimension Parameters
| Parameters | Molded cover/flat cover | Cover | ||
1# | 2# | 3# | 4# | |
A: Total height | 990 | 1365 | 525 | 635 |
B: The distance from inlet to center | 147 | 92 | ||
G: Shell diameter | φ204 | φ204 | φ114 | φ114 |
D1: The height from inlet to ground | 835 | 1205 | 445 | 555 |
D2: The height from outlet to ground | 250 | 300 | ||
In-outlet N1、N2 Size | 1.5 or 2 | 1 or 1.5 | ||
E: Stabilizer blade | 500 | 800 | 300 | 400 |
Max fiow m3/h | 20 | 40 | 6 | 12 |
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
Qty of Bag Filter | Modal of Bag Fiter | Shell Material | In-outler comection | O-ring |
1P | 2S | 4 | F | E |
1P=1Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
2S=2#Bag:φ180x810 | 6=316L | K=Tri-clamp | P=PTFE | |
3S=3#Bag:φ105×230 | D=Duplex SS | L=Thread | V=Viton | |
4S=4#Bag:φ105x380 | T=Titanium | S=Silicone | ||
H=Hastelloy |
模压盖/平盖 | 平盖Cover | |||
1号袋 | 2号袋 | 3号袋 | 4号袋 | |
A:总高(不含压力表)Total height | 990 | 1365 | 525 | 635 |
B:进口中心距 The distance from inlet to center | 147 | 92 | ||
G;直径Shell diameter | φ204 | φ204 | φ114 | φ114 |
D1;进口离地高度 The height from inlet to ground | 835 | 1205 | 445 | 555 |
D2;出口离地高度 The height from outlet to ground | 250 | 300 | ||
进出口In-outlet N1、N2尺寸Size | 1.5或2 | 1或1.5 | ||
E;可调支脚高度Stabilizer blade | 500 | 800 | 300 | 400 |
最大流量Max fiow m/h | 20 | 40 | 6 | 12 |
Feature of Side Entry Filter
JTGCD Side-entry bag fiter with single fiter bag is for some coarse filtration and pre-filtration process.
Side entry structure is a economical and reasonable design which can effectively save space of the filter.
Pressure ring and the spring ensure good seal between the fiter and the fiter bag.
With adjustable legs, the installation size can be adjusted according to the requirements of the particular spot.
Side entry bag filter
Operating Conditions
Max operating pressure | 0.6MPa、1.0MPa |
Max operating temperture | 150℃ |
Material
Shell | 304, 316L, Duplex SS, Titanium,Hastelloy |
Eyebolt | 304 |
Stabilizer Blade | 304 |
O-ring |
EPDM, PTFE, Viton, Silicone |
Connection
Connection of shell | Flange |
In-outlet N1、N2 | Flange, Tn-clamp, Thread |
N3 Pressure gauge (option) | 1.5"Tri-clamp(1#Bag/2#Bag) M14×1.5 Female thread (3#Bag/4#Bag) |
N4Vent valve (option) | 1/4"Male thread |
Surface Finish
Finish Type | Mechanical/ Eiectrolytical polishing Sand blasting |
Polishing Precision | Inner surface Ra≤0.6μm Outside surface Ra≤0.8μm Basket 0.6μm |
Dimension Parameters
| Parameters | Molded cover/flat cover | Cover | ||
1# | 2# | 3# | 4# | |
A: Total height | 990 | 1365 | 525 | 635 |
B: The distance from inlet to center | 147 | 92 | ||
G: Shell diameter | φ204 | φ204 | φ114 | φ114 |
D1: The height from inlet to ground | 835 | 1205 | 445 | 555 |
D2: The height from outlet to ground | 250 | 300 | ||
In-outlet N1、N2 Size | 1.5 or 2 | 1 or 1.5 | ||
E: Stabilizer blade | 500 | 800 | 300 | 400 |
Max fiow m3/h | 20 | 40 | 6 | 12 |
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
Qty of Bag Filter | Modal of Bag Fiter | Shell Material | In-outler comection | O-ring |
1P | 2S | 4 | F | E |
1P=1Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
2S=2#Bag:φ180x810 | 6=316L | K=Tri-clamp | P=PTFE | |
3S=3#Bag:φ105×230 | D=Duplex SS | L=Thread | V=Viton | |
4S=4#Bag:φ105x380 | T=Titanium | S=Silicone | ||
H=Hastelloy |
模压盖/平盖 | 平盖Cover | |||
1号袋 | 2号袋 | 3号袋 | 4号袋 | |
A:总高(不含压力表)Total height | 990 | 1365 | 525 | 635 |
B:进口中心距 The distance from inlet to center | 147 | 92 | ||
G;直径Shell diameter | φ204 | φ204 | φ114 | φ114 |
D1;进口离地高度 The height from inlet to ground | 835 | 1205 | 445 | 555 |
D2;出口离地高度 The height from outlet to ground | 250 | 300 | ||
进出口In-outlet N1、N2尺寸Size | 1.5或2 | 1或1.5 | ||
E;可调支脚高度Stabilizer blade | 500 | 800 | 300 | 400 |
最大流量Max fiow m/h | 20 | 40 | 6 | 12 |
