 |
| Quantity: | |
|---|---|
Feature of Multi Cartidge Sanitary Filter
● JTGLD Multi fluid Sanitary Filter can meet requirement of medium & small flow rate.
● The structure design and manufacture in accordance with the sanitary grade. It's no dead corner, meet'GMP" standard, easy to clean, drain thoroughly, no residual liquid.
● For the application of some very harsh cleaning, the fiter faceplate made of detachable, full angle cleaning.
Application
● Pharmaceutical industry: all kinds of antibiotics and other liquid
● Food and beverage industry: wine, mineral water, drinking water
● Oi industry: oi field water injection fitration.
● Electronics industry: high purity water fitration .
● Chemical industry: all kinds of organic solvent, acid, lye fitration.
The Characteristic of Multi Cartidge Sanitary Filter
● The ultra high level of polishing, the inner surface polished to 0.3μm Ra. the outer surface to reach 0.4μm, the absolute hygienic level polishing.
● The vent valve can choose quick-open, can completely disassembled and no dead corner of cleaning.
● Small specification fiter installation adjusting nut at the bottom of the Stabilizer blade, can adjust the height of the fiter, easy to use.
Operating Conditions
Max Operating Pressure | 0.6MPa、1.0MPa |
Max Operating Temperture | 50℃ |
Disinfect(Sanitatlon) | 121℃/30min 121℃/30min |
Material
Shell | SS304,SS316L,Duplex SS,Titanium, Hastellkoy |
Vent/ Drain valve | SS304 |
Eyebolt | SS304 |
O-ring | EPDM, PTFE.Viton, Silicone |
Connection
Connection of Shell | Tri-clamp, Flange |
N1、N2 In-outlet | Tri-clamp |
N3 Pressure Gauge (option) | 1.5 Tri-clamp |
N4 Vent Valve (option) | 112 Tri-clampM6 Thread |
N5 Drain Valve (option) | 1/2 Tri-clamp |
Cartridges connection | 2221ype, 226 type (sanitation) DOE type(industriai-grade) |
Surface Finish
Finish Type | Mechanical/Electrolytical Polishing |
Polishing Precision | 0.4um Outside Surface Ra<04μm |
Dimension Parameters
3R(4R) | 5R(6R) | 7R(8R) | ||||||||||
10° | 20 | 30° | 40° | 10° | 20° | 30 | 40° | 10° | 20° | 30° | 40 | |
A: Total height | 760 | 1010 | 1260 | 1510 | 780 | 1030 | 1280 | 1530 | 805 | 1055 | 1305 | 1555 |
B: The distance from inlet to center | 160 | 160 | 200 | |||||||||
C: Shell diameter | φ204 | φ235 | φ273 | |||||||||
D: NUIN2 The heignt rom in-ounlet N1, N2 to the ground | 200 | 200 | 200 | |||||||||
In-oulet N1、N2 size | 1.5" | 2" | 2.5" | |||||||||
JTGLD Selection Table
［Qty. of cartridge］ | ［Model of cartridge］ | ［ Cartridges connection］ | ［ Shell Material］ | ［ In-outlet connection］ | ［ O-ring］ |
5R | 20 | S | 4 | K | E |
3R=3Pcs | 10=10" Cartridge | S=226#(sanitary grade) | 4= 304 | K=Tri-clamp | E=EPDM |
5R=5Pcs | 20=20" Cartridge | T=222#(sanitary grade) | 6= 316L | P= PTFE | |
7R=7 Pcs | 30=30" Cartridge | D=DOE(industrial grade) | D=Duplex SS | V=Viton | |
9R=9 Pcs | 40=40" Cartridge | T=Titanium | S=Silicone | ||
12R=12Pcs | H=Hastelloy |
Feature of Multi Cartidge Sanitary Filter
● JTGLD Multi fluid Sanitary Filter can meet requirement of medium & small flow rate.
● The structure design and manufacture in accordance with the sanitary grade. It's no dead corner, meet'GMP" standard, easy to clean, drain thoroughly, no residual liquid.
● For the application of some very harsh cleaning, the fiter faceplate made of detachable, full angle cleaning.
Application
● Pharmaceutical industry: all kinds of antibiotics and other liquid
● Food and beverage industry: wine, mineral water, drinking water
● Oi industry: oi field water injection fitration.
● Electronics industry: high purity water fitration .
● Chemical industry: all kinds of organic solvent, acid, lye fitration.
The Characteristic of Multi Cartidge Sanitary Filter
● The ultra high level of polishing, the inner surface polished to 0.3μm Ra. the outer surface to reach 0.4μm, the absolute hygienic level polishing.
● The vent valve can choose quick-open, can completely disassembled and no dead corner of cleaning.
● Small specification fiter installation adjusting nut at the bottom of the Stabilizer blade, can adjust the height of the fiter, easy to use.
Operating Conditions
Max Operating Pressure | 0.6MPa、1.0MPa |
Max Operating Temperture | 50℃ |
Disinfect(Sanitatlon) | 121℃/30min 121℃/30min |
Material
Shell | SS304,SS316L,Duplex SS,Titanium, Hastellkoy |
Vent/ Drain valve | SS304 |
Eyebolt | SS304 |
O-ring | EPDM, PTFE.Viton, Silicone |
Connection
Connection of Shell | Tri-clamp, Flange |
N1、N2 In-outlet | Tri-clamp |
N3 Pressure Gauge (option) | 1.5 Tri-clamp |
N4 Vent Valve (option) | 112 Tri-clampM6 Thread |
N5 Drain Valve (option) | 1/2 Tri-clamp |
Cartridges connection | 2221ype, 226 type (sanitation) DOE type(industriai-grade) |
Surface Finish
Finish Type | Mechanical/Electrolytical Polishing |
Polishing Precision | 0.4um Outside Surface Ra<04μm |
Dimension Parameters
3R(4R) | 5R(6R) | 7R(8R) | ||||||||||
10° | 20 | 30° | 40° | 10° | 20° | 30 | 40° | 10° | 20° | 30° | 40 | |
A: Total height | 760 | 1010 | 1260 | 1510 | 780 | 1030 | 1280 | 1530 | 805 | 1055 | 1305 | 1555 |
B: The distance from inlet to center | 160 | 160 | 200 | |||||||||
C: Shell diameter | φ204 | φ235 | φ273 | |||||||||
D: NUIN2 The heignt rom in-ounlet N1, N2 to the ground | 200 | 200 | 200 | |||||||||
In-oulet N1、N2 size | 1.5" | 2" | 2.5" | |||||||||
JTGLD Selection Table
［Qty. of cartridge］ | ［Model of cartridge］ | ［ Cartridges connection］ | ［ Shell Material］ | ［ In-outlet connection］ | ［ O-ring］ |
5R | 20 | S | 4 | K | E |
3R=3Pcs | 10=10" Cartridge | S=226#(sanitary grade) | 4= 304 | K=Tri-clamp | E=EPDM |
5R=5Pcs | 20=20" Cartridge | T=222#(sanitary grade) | 6= 316L | P= PTFE | |
7R=7 Pcs | 30=30" Cartridge | D=DOE(industrial grade) | D=Duplex SS | V=Viton | |
9R=9 Pcs | 40=40" Cartridge | T=Titanium | S=Silicone | ||
12R=12Pcs | H=Hastelloy |
