 |
| Quantity: | |
|---|---|
Feature Of Magnetic Fluid Fliter
●JTGCX Magnetic Fluid Filter is applied to the fluid,semifluid and other different viscous fluid materials,remove the iron impurities and other ferromagnetic particles.To keep the material clean and protect the downstream production equipment at the same time.
●JTGCX Magnetic Fluid Filter using muti channel polishing processing to ensure the interface Ra reach to 0.6um close to sanitary level.All of the surface is mirror polished.
Application
●Used in food and beverage,metal processing,pharmaceutical.ceramics, paper, cosmetics, fine chemical industry. etc.To protect main equipment from the destruction of the iron particles.
The Characterstic of Magnetic Fluid Fliter
●Barrel's internal and external surface using mirror polish,interface Ra reach to 0.6um close to sanitary level.
●Using Flange,quick-open,eyebolt plate or quick release clamp can easy to install,take out and clean magnetic component.
●Reasonable structure design can ensure the best de-ferrous effect at the same time not impede the flow of the material.
Surface Finish
Finish Type | Mechanical polishing, electrolyticpolishing, sand blasting, pickling |
Polishing Precision | Inner surface Ra≤0.6μm , |
Operating Conditions
Max .Operating Pressure | 0.6MPa, 1.0MPa |
Max .Operating Temp. | 150℃ |
Material
Filter Shell | SS304, SS316L |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shell Connection | Tri-clamp(0.6MPa), |
In-outlet N1, N2 | Flange, Tri-clamp, Thread |
Dimension Parameters
Qty. of magnet | Shell diameter | Inlet and outlet N1、N2 size | Magnetic bar | |
Diameter | Length | |||
1 | Φ50 | 1"/1.5" | Φ20 | 6"/8"/10" |
4、5 | Φ114 | 1"/1.5"/2"/2.5" | ||
6、7 | Φ159 | 1.5"/2"/2.5"/3" | ||
9 | Φ190 | 2"/2.5"/3"/4" | ||
The diameter of In-outlet under 3” using quick-open, 3” and 4” usingflange. it can customize according to customer's requirements. Dimension anapproximate value, for reference only.
Selection Table
Series number | No. of magnetic | Magnet model | Shell material | In-outlet Connections | ［O-ring］ |
A | 9R | 26 | 4 | F | S |
A=Aseries | 1R=1pc | 206, 208, 210 | 4=304 | F=flange | E=EPDM |
B=Bseries | 4R=4pcs/5pcs | 6=316L | K=quick-installed | P=PTFE | |
C=Cseries | 7R=6pcs/7pcs | L=screwthread | V=Viton | ||
D=Dseries | 9R=9pcs | S=Silicone | |||
E=Eseries |
Feature Of Magnetic Fluid Fliter
●JTGCX Magnetic Fluid Filter is applied to the fluid,semifluid and other different viscous fluid materials,remove the iron impurities and other ferromagnetic particles.To keep the material clean and protect the downstream production equipment at the same time.
●JTGCX Magnetic Fluid Filter using muti channel polishing processing to ensure the interface Ra reach to 0.6um close to sanitary level.All of the surface is mirror polished.
Application
●Used in food and beverage,metal processing,pharmaceutical.ceramics, paper, cosmetics, fine chemical industry. etc.To protect main equipment from the destruction of the iron particles.
The Characterstic of Magnetic Fluid Fliter
●Barrel's internal and external surface using mirror polish,interface Ra reach to 0.6um close to sanitary level.
●Using Flange,quick-open,eyebolt plate or quick release clamp can easy to install,take out and clean magnetic component.
●Reasonable structure design can ensure the best de-ferrous effect at the same time not impede the flow of the material.
Surface Finish
Finish Type | Mechanical polishing, electrolyticpolishing, sand blasting, pickling |
Polishing Precision | Inner surface Ra≤0.6μm , |
Operating Conditions
Max .Operating Pressure | 0.6MPa, 1.0MPa |
Max .Operating Temp. | 150℃ |
Material
Filter Shell | SS304, SS316L |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shell Connection | Tri-clamp(0.6MPa), |
In-outlet N1, N2 | Flange, Tri-clamp, Thread |
Dimension Parameters
Qty. of magnet | Shell diameter | Inlet and outlet N1、N2 size | Magnetic bar | |
Diameter | Length | |||
1 | Φ50 | 1"/1.5" | Φ20 | 6"/8"/10" |
4、5 | Φ114 | 1"/1.5"/2"/2.5" | ||
6、7 | Φ159 | 1.5"/2"/2.5"/3" | ||
9 | Φ190 | 2"/2.5"/3"/4" | ||
The diameter of In-outlet under 3” using quick-open, 3” and 4” usingflange. it can customize according to customer's requirements. Dimension anapproximate value, for reference only.
Selection Table
Series number | No. of magnetic | Magnet model | Shell material | In-outlet Connections | ［O-ring］ |
A | 9R | 26 | 4 | F | S |
A=Aseries | 1R=1pc | 206, 208, 210 | 4=304 | F=flange | E=EPDM |
B=Bseries | 4R=4pcs/5pcs | 6=316L | K=quick-installed | P=PTFE | |
C=Cseries | 7R=6pcs/7pcs | L=screwthread | V=Viton | ||
D=Dseries | 9R=9pcs | S=Silicone | |||
E=Eseries |
