 |
| Quantity: | |
|---|---|
Feature Of Lenticular Filter
●JTGDB Lenticular Filter is a new type of stacks filter,can be used in place of diatomite filter,for tiny impurities in varied kinds of liquid filtration,clarification,purification!
●The structure is designed and manufactured according to the health level,internal is no dead corner and mirror polishing,it ensure no residual liquid and easy to clean.
●JTGDB Lenticular Filter Housing can maximal install 4 filter stacks,it can fit for big flow requirements .
Application
●Microbe and solid filtration of alcohol,syrup,beer.
●End filtration of fruit juice and juice concentrate.
●Pre filtering of juice membrane filtration.
●Clarification of alcohol,enzyme dissolution,liquid gum,olive oil.
●Pharmaceutical,chemical,electronic filtration.
The Characteristic of Lenticular Filter
●Easy to clean,the inlet/outlet can be configured special discharge valve,easy to drain.
●Easy to replace the filter stacks,reduce the filter medium leakage.
Surface finish
Finish Type | Mechanical polishing, |
Polishing Precision | Inner surface Ra≤0.3μm , Outside surface Ra≤0.4μm. |
Operating Conditions
Max .Operating pressure | 0.6MPa |
Max .Operating Temp. | 150℃ |
Disinfect | Online or steam sterilization：121℃/30min |
Material
Shell | SS304, SS316L, SAF2507, Carbon |
Vent | SS304, SS316L |
Eyebolt | SS304 |
Stabilizer Blade | SS304 |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shell connection | Flange |
In-outlet N1, N2 | Flange, Quick-open, |
Pressure gauge (option) | 1.5” tri-clamp |
Drain valve(option) | 1” tri-clamp |
Vent valve (option) | 1/2” tri-Clamp |
Dimension Parameters | 12"Filter stacks | 16" Filter stacks | ||||||
1(B) | 2 (B) | 3(B) | 4(B) | 1 (B) | 2(B) | 3(B) | 4 (B) | |
A：Total height | 950 | 1210 | 1490 | 1760 | 960 | 1230 | 1500 | 1770 |
B：The distance from inlet to center | 200 | 250 | ||||||
C： Shell diameter | Φ325 | Φ450 | ||||||
D：The height from in-outlet to ground | 280 | 280 | ||||||
In-outlet N1, N2 size | 2" | 2" | ||||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
［Qty. of Filter Cake］ | ［Model of Filter Cake］ | ［Shell Material］ | ［In-outlet connection］ | ［O-ring］ | |
JTGDB | 1B | 12 | 4 | F | E |
1B=1pc | 12=12” Filter Cake | 4= 304 | F= Flange | E=EPDM | |
2B=2pcs | 16=16” Filter Cake | 6= 316L | K= Quick-open | P=PTFE | |
3B=3pcs | L= Screw thread | V=Viton | |||
4B=4pcs | S=Silicone |
Feature Of Lenticular Filter
●JTGDB Lenticular Filter is a new type of stacks filter,can be used in place of diatomite filter,for tiny impurities in varied kinds of liquid filtration,clarification,purification!
●The structure is designed and manufactured according to the health level,internal is no dead corner and mirror polishing,it ensure no residual liquid and easy to clean.
●JTGDB Lenticular Filter Housing can maximal install 4 filter stacks,it can fit for big flow requirements .
Application
●Microbe and solid filtration of alcohol,syrup,beer.
●End filtration of fruit juice and juice concentrate.
●Pre filtering of juice membrane filtration.
●Clarification of alcohol,enzyme dissolution,liquid gum,olive oil.
●Pharmaceutical,chemical,electronic filtration.
The Characteristic of Lenticular Filter
●Easy to clean,the inlet/outlet can be configured special discharge valve,easy to drain.
●Easy to replace the filter stacks,reduce the filter medium leakage.
Surface finish
Finish Type | Mechanical polishing, |
Polishing Precision | Inner surface Ra≤0.3μm , Outside surface Ra≤0.4μm. |
Operating Conditions
Max .Operating pressure | 0.6MPa |
Max .Operating Temp. | 150℃ |
Disinfect | Online or steam sterilization：121℃/30min |
Material
Shell | SS304, SS316L, SAF2507, Carbon |
Vent | SS304, SS316L |
Eyebolt | SS304 |
Stabilizer Blade | SS304 |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shell connection | Flange |
In-outlet N1, N2 | Flange, Quick-open, |
Pressure gauge (option) | 1.5” tri-clamp |
Drain valve(option) | 1” tri-clamp |
Vent valve (option) | 1/2” tri-Clamp |
Dimension Parameters | 12"Filter stacks | 16" Filter stacks | ||||||
1(B) | 2 (B) | 3(B) | 4(B) | 1 (B) | 2(B) | 3(B) | 4 (B) | |
A：Total height | 950 | 1210 | 1490 | 1760 | 960 | 1230 | 1500 | 1770 |
B：The distance from inlet to center | 200 | 250 | ||||||
C： Shell diameter | Φ325 | Φ450 | ||||||
D：The height from in-outlet to ground | 280 | 280 | ||||||
In-outlet N1, N2 size | 2" | 2" | ||||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
［Qty. of Filter Cake］ | ［Model of Filter Cake］ | ［Shell Material］ | ［In-outlet connection］ | ［O-ring］ | |
JTGDB | 1B | 12 | 4 | F | E |
1B=1pc | 12=12” Filter Cake | 4= 304 | F= Flange | E=EPDM | |
2B=2pcs | 16=16” Filter Cake | 6= 316L | K= Quick-open | P=PTFE | |
3B=3pcs | L= Screw thread | V=Viton | |||
4B=4pcs | S=Silicone |
