Feature Of Industial Grade Precision Liquid Filter
● JTGSF Industrial Grade Precision Liquid Fiter is precision fiter which is specially designed for industrial field, It can be applied for various.
● The iter housing using side enty & bottom out fiow method,it ensure that the material id does not overflow when replace spucure shell can be oenednomooang otonuthe titer can cleaning,the fiter can full angle cleaning.
● JTGSF Industrial Grade Precision Liquid Fiter use many times poishing process, ensure that the materialliauid contac sufacs Fa is mirror polished. It can be applied in high precision liquid filtration.
Application:
● Water Finish; all kinds of water fitration.
● Food & beverage:wine, mineral water, drinking water fitration.
● Chemical industrys all kinds of organic solvents, acid, alkal,filtration.
The Characteristic of Industial Grade Precision Liquid Filter
● Fiter can be made into the form of top and bottom openings.which is convenient to replace the fiter and to clean thoroughly.
● The fiter faceplate can be made into a detachable type, to achieve thorough cleaning.
● Two drain vents, respectively in the top of the disk and the bottom of the fiter, let discharging easy and complete.
● Side in and bottom out,this design ensures that the liquid can be completely discharged. At the sarme time, tangent oulet makes sewage discharged thoroughly, and workers operate easily.
● For more than 15 cartridges fiter housing, the swing arm andeyebolt or quick opan are optional design to operate easily. Also it is a economical and practical design.
Operating Conditions
Max Operating Pressure | 0.6Mpa、10Mpa |
Max Operating Temperture | 150℃ |
Surface Finish
Fnish Type | Mechanical Electrolytical polishing |
Polishing Precision | Inner surface Ra≤0.4μm ,
Outside surface Ra≤0.8μm. |
Material
Shell | SS304.SS316L, Duplex SS, Titanium,Hasteloy |
Vent/ Drain valve | SS304、SS316L |
Eyebot | SS304 |
Stabilizer blade | SS304 |
O-ring | EPDM, PTFE, Viton,Silicone
|
Connection
Connection of shell | Flange(Eyesbolt) |
N1,N2 In-outlet | Tri- clamp |
N3 Pressure Gauge (opion) | 1.5"Tri - clamp |
N4 Vent Valve(opion) | 1“Tri-clamp （less than 12pcs) 1.5”Tri-clamp (more than 15pcs) |
N5 Drain Valve (option) | 1”Tri-clamp(more than 15pcs) |
Cartridges Connection | 222/226#DOE 222#,226#,DOE |
JTGSF Selection Table
Qty. of Cartridge
| Model of Cartridge
| Cartridges Connection
| Shell Material
| In-outlet connection
| O-ring |
12R | 20 | S | 4 | K | E |
3R=3Pcs | 21R=21Pes | 20=20Carridge | S=226Type | 4=304 | K=Tri-clamp | E=EPDM |
5R=5Pes | 24R=24Pcs | 30-30Carridge | T-2228Type | 6=316L | Fange | P=PTFE |
-TPes | 36R=36Pcs | 40=40°Cartridge | D=DOEType | D=Duplex SS | L=Screw thread | V=Viton |
8R=8Pcs | 42R=42Pcs |
|
| T=Titanium |
| S=Silicone |
9R=9Pcs | 48R=48Pcs |
|
| H=Hastelloy |
|
|
12R=12Pcs | 56R=56Pcs |
|
|
|
|
|
15R=15Pcs |
|
|
|
|
|
|
Dimension Parameters
| 3R(4R) | 5R(6R) |
20" | 30" | 40" | 20" | 30" | 40" |
A:Total height | 1123 | 1373 | 1623 | 1145 | 1395 | 1645 |
B;The distance from inlet to center | 142 | 165 |
C:Shell diameter | φ204 | φ250 |
D1:The height from inlet to ground | 540 | 660 |
D2: The height from outlet to ground | 300 | 300 |
In-outlet N1、N2 size | 1.5"/2"/2.5" | 1.5"/2"/2.5"/3" |
| (7R) | (8R) |
20" | 30" | 40" | 20" | 30" | 40" |
1145 | 1395 | 1645 | 1170 | 1420 | 1670 |
176.5 | 190 |
φ273 | φ300 |
660 | 660 |
300 | 300 |
1.572/2.5 | 1.5/2'/2.5/3 |
9R(10R) | 12R(11R) |
20" | 30" | 40" | 20" | 30" | 40" |
1170 | 1420 | 1670 | 1170 | 1420 | 1670 |
202.5 | 215 |
φ325 | φ350 |
660 | 660 |
300 | 300 |
1.5"/2"/2.5"/3" | 1.5"/2"2.5"3" |
15(188) | (21R) | 24R(27/30R) 24R(27/30R) | (36R) | (42R) | 48R(54R) 48R(54R) |
40 | 40° | 40° | 40° | 40 | 40 |
1947 | 1959 | 2026 | 2036 | 2044 | 2067 |
240 | 265 | 290 | 315 | 340 | 365 |
φ400 | φ450 | φ500 | φ550 | φ600 | φ650 |
682 | 694 | 714 | 729 | 734 | 744 |
| 300 |
|
| 300 |
|
| 3"/3.5"/4" |
|
| 3"/3.5"/4" |
|
