 |
| Quantity: | |
|---|---|
Horizontal Melting Dissolving Tank be designed, manufactured and inspected in accordance with the pressure vessel standard (GB150-2011) and the steel welded atmospheric pressure vessel standard (NB/T 47003.1-2009), strictly meet to GMP certificate requirements.
Jhenten Horizontal Melting Dissolving Tank usually adopts horizontal round tank, left and right sides are standard flat head, the inner wall use circular arc transition, no dead corner, easy to clean. Jacket type (tank body, and left, right side head are equipped with jacket and insulation layer), tank inner wall are mirror polished, meet GMP standard, configuration of mechanical stirring.
●TVolume: 1000L～10000L, which can be designed and customized according to the customers' requirements.
●Jacket can put into steam (or hot water), also can put into cooling water, jacket is dimple jacket; Jacketed outside covered with insulation layer, insulation material is rock wool (keep warm) or PU (keep cold).
●Connector use tri-clamp, inner tank use SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can be polishing, wiredrawing ,sandblasting according to customer's requirement.
●The stiring type is a special type of anchor frame; stiring work speed should be about 7 r/min, stirring shaft seal adopts the sanitary mechanical seal, stirring motor can use planet-cycloid retarder,stepless reducer according to the customers' requirements.
Structure
It optional configuration : sterile air filter, thermometer (digital display type or dial), sight glasses, sanitary manhole, in-outlet, CIP universal rotating cleaning ball, sterile sampling valve (stainless steel tank bottom), level gauge etc., or configured according to customer requirements.
Design Parameter
Design Pressure | Cylinder:-0.1MPa～1MPa,jacket:(ATM～0.5MPa) |
Design Temperature | According to customers’ requirement（0℃～200℃） |
Material
Inner Shell | SS304, SS316L, Duplex SS, Titanium, Hastelloy |
Jacket | SS304, SS316L, Duplex SS, Titanium, Hastelloy |
Insulation | Rock wool or PU |
Leg | SS304 |
Connection
In-outlet | Tri-clamp, Flange,Thread |
Surface Finish
Finish Type | Mechanical/electrolytic polishing, sand blasting, pickling |
Polishing Precision | Inner surface Ra≤0.4μm， |
Normal Model And Main TechnicalParameters
Parameters Model | JTRRJ-1000 | JTRRJ-2000 | JTRRJ-5000 | JTRRJ-10000 | |
Effective volume (L) | 1000 | 2000 | 5000 | 10000 | |
Tank | Diameter (mm) | Φ1100 | Φ1400 | Φ1900 | Φ2400 |
Height (mm) | 1100 | 1400 | 2000 | 2300 | |
Mixing | Power (kW) | 3 | 4 | 5.5 | 9.2 |
RPM (r/min) | 7(Anchor type) | ||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
Horizontal Melting Dissolving Tank be designed, manufactured and inspected in accordance with the pressure vessel standard (GB150-2011) and the steel welded atmospheric pressure vessel standard (NB/T 47003.1-2009), strictly meet to GMP certificate requirements.
Jhenten Horizontal Melting Dissolving Tank usually adopts horizontal round tank, left and right sides are standard flat head, the inner wall use circular arc transition, no dead corner, easy to clean. Jacket type (tank body, and left, right side head are equipped with jacket and insulation layer), tank inner wall are mirror polished, meet GMP standard, configuration of mechanical stirring.
●TVolume: 1000L～10000L, which can be designed and customized according to the customers' requirements.
●Jacket can put into steam (or hot water), also can put into cooling water, jacket is dimple jacket; Jacketed outside covered with insulation layer, insulation material is rock wool (keep warm) or PU (keep cold).
●Connector use tri-clamp, inner tank use SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can be polishing, wiredrawing ,sandblasting according to customer's requirement.
●The stiring type is a special type of anchor frame; stiring work speed should be about 7 r/min, stirring shaft seal adopts the sanitary mechanical seal, stirring motor can use planet-cycloid retarder,stepless reducer according to the customers' requirements.
Structure
It optional configuration : sterile air filter, thermometer (digital display type or dial), sight glasses, sanitary manhole, in-outlet, CIP universal rotating cleaning ball, sterile sampling valve (stainless steel tank bottom), level gauge etc., or configured according to customer requirements.
Design Parameter
Design Pressure | Cylinder:-0.1MPa～1MPa,jacket:(ATM～0.5MPa) |
Design Temperature | According to customers’ requirement（0℃～200℃） |
Material
Inner Shell | SS304, SS316L, Duplex SS, Titanium, Hastelloy |
Jacket | SS304, SS316L, Duplex SS, Titanium, Hastelloy |
Insulation | Rock wool or PU |
Leg | SS304 |
Connection
In-outlet | Tri-clamp, Flange,Thread |
Surface Finish
Finish Type | Mechanical/electrolytic polishing, sand blasting, pickling |
Polishing Precision | Inner surface Ra≤0.4μm， |
Normal Model And Main TechnicalParameters
Parameters Model | JTRRJ-1000 | JTRRJ-2000 | JTRRJ-5000 | JTRRJ-10000 | |
Effective volume (L) | 1000 | 2000 | 5000 | 10000 | |
Tank | Diameter (mm) | Φ1100 | Φ1400 | Φ1900 | Φ2400 |
Height (mm) | 1100 | 1400 | 2000 | 2300 | |
Mixing | Power (kW) | 3 | 4 | 5.5 | 9.2 |
RPM (r/min) | 7(Anchor type) | ||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
