 |
| Quantity: | |
|---|---|
Feature Of Casting Single Cartridge Filter
● ZJTGDG Single Fluid Industrial Filter adopts the integrated casting top structure. Based on top in top out design, with the adaptor, it can be directly connected to the pipeline, the installation is extremely easy.
●The fiter housing is sanitary grade, polishing precision Ra< 0.6μm suitable for many knds of fiter requrements
● JTGDG Single Fluid Industial Filter adopts very compact structure design, and the top can be fixed in the pipeline.When you exchange the cartidges.just open the fiter housing. There is no liquid leakage in whole process.
● Drain valve at the bottom is convenient for operator to discharge liquid.
Application
●Water Finish: all kinds of water fitration.
●Food & beverage:wine, mineral water, drinking water fitration.
●Chemical industry: all kinds of organic solvents, acid, alkal, filtration.
The Characteristic Of Casting Single Cartridge Filter
● The filter is top entry 8 top out structure, Can be directy connected to the pipeline.
●It's easy to change cartidge, and no liquid leakage.
● Drain valve at the bottom.lt's convenient for operator to discharge liquid. Salety seal design.
Operating Conditions
Max Operating Pressure | 0.6MPa、1.0MPa | ||
Max Operating Temperture | 50℃ | ||
Material
Shell | SS304,SS316L,Duplex SS, Titanium, Hastelloy |
Drain Valve | SS304 |
O-ring | EPDM, PTFE, Viton,Sillcone |
Connection
Connection of shell | Quick-open, screw thread |
N1、N2 In-outlet | 1" thread |
N3 Pressure Gauge (option) | 1/4'thread |
N4 Vent Valve (option) | 1/4'thread |
Cartridges Connection | DOE Type |
Surface Finish
Finish Type | base：cast shell：Mechanical polishing, electrolytic polishing, sand blasting，pickling |
Polishing Precision | 0.6μm Inner surlace Ras03um 0.8um Outside surfaoe Ra≤0.4μm |
Dimension Parameters
| 1 (1R) | |||
10" | 10" | 10" | |
A： Total height | 625 | 625 | 625 |
B：The distance from inlet to center | 110 | ||
C：Shell diameter | Φ101.6 | ||
In-outlet N1、N2尺寸 Size | 1" Thread | ||
JTGDG Selection Table
Qty. of cartridge | Model of cartridge | Cartridges connection | Shell Materal | In-outlet comection | O-ring |
1R | 20 | D | 4 | K | E |
1R=1Pcs | 10=10°Cartridge | D=DOE Type | 4=304 | L=Thread | E=EPDM |
20=20°Cartridge | 6=316L | P=PTFE | |||
30=30°Cartridge | D=Duplex SS | V=Viton | |||
40=40°Cartridge | T=Titanium | S=Sillcone | |||
H=Hastelloy |
Feature Of Casting Single Cartridge Filter
● ZJTGDG Single Fluid Industrial Filter adopts the integrated casting top structure. Based on top in top out design, with the adaptor, it can be directly connected to the pipeline, the installation is extremely easy.
●The fiter housing is sanitary grade, polishing precision Ra< 0.6μm suitable for many knds of fiter requrements
● JTGDG Single Fluid Industial Filter adopts very compact structure design, and the top can be fixed in the pipeline.When you exchange the cartidges.just open the fiter housing. There is no liquid leakage in whole process.
● Drain valve at the bottom is convenient for operator to discharge liquid.
Application
●Water Finish: all kinds of water fitration.
●Food & beverage:wine, mineral water, drinking water fitration.
●Chemical industry: all kinds of organic solvents, acid, alkal, filtration.
The Characteristic Of Casting Single Cartridge Filter
● The filter is top entry 8 top out structure, Can be directy connected to the pipeline.
●It's easy to change cartidge, and no liquid leakage.
● Drain valve at the bottom.lt's convenient for operator to discharge liquid. Salety seal design.
Operating Conditions
Max Operating Pressure | 0.6MPa、1.0MPa | ||
Max Operating Temperture | 50℃ | ||
Material
Shell | SS304,SS316L,Duplex SS, Titanium, Hastelloy |
Drain Valve | SS304 |
O-ring | EPDM, PTFE, Viton,Sillcone |
Connection
Connection of shell | Quick-open, screw thread |
N1、N2 In-outlet | 1" thread |
N3 Pressure Gauge (option) | 1/4'thread |
N4 Vent Valve (option) | 1/4'thread |
Cartridges Connection | DOE Type |
Surface Finish
Finish Type | base：cast shell：Mechanical polishing, electrolytic polishing, sand blasting，pickling |
Polishing Precision | 0.6μm Inner surlace Ras03um 0.8um Outside surfaoe Ra≤0.4μm |
Dimension Parameters
| 1 (1R) | |||
10" | 10" | 10" | |
A： Total height | 625 | 625 | 625 |
B：The distance from inlet to center | 110 | ||
C：Shell diameter | Φ101.6 | ||
In-outlet N1、N2尺寸 Size | 1" Thread | ||
JTGDG Selection Table
Qty. of cartridge | Model of cartridge | Cartridges connection | Shell Materal | In-outlet comection | O-ring |
1R | 20 | D | 4 | K | E |
1R=1Pcs | 10=10°Cartridge | D=DOE Type | 4=304 | L=Thread | E=EPDM |
20=20°Cartridge | 6=316L | P=PTFE | |||
30=30°Cartridge | D=Duplex SS | V=Viton | |||
40=40°Cartridge | T=Titanium | S=Sillcone | |||
H=Hastelloy |
